How to manage air compressor well in manufacturing enterprises?

1. should choose a wide, well-lit place, in order to facilitate the air compressor operation, maintenance and repair of the required space and lighting.

2. The ground in the air compressor room must be flat and hard (generally, a cement flat is enough). At the same time, attention should be paid to keeping the ground clean and free from debris accumulation, especially inflammable and explosive articles, and facilities such as fire extinguishers should be equipped to ensure the safety of the computer room.

3. the placement of air compressor should be careful not to cling to the wall, to set aside a certain distance, to ensure a certain ventilation and maintenance space, but also conducive to the maintenance of air compressor.

4. The air compressor room should maintain a certain ambient temperature, which should not be higher than 35℃ or lower than 0℃. Pay attention to control the temperature of the air compressor room as low as possible, and the air compressor will absorb the air with higher temperature to reduce the exhaust air volume.

5. The place where the air compressor room is located should be kept dry, with good ventilation conditions, less dust and fresh air. Avoid dusty, oily and humid environment as far as possible, so as to reduce the damage to the air compressor and prolong its service life. Moreover, it is not allowed for the air compressor to inhale corrosive gases, paint molecules and gases containing explosive or unstable chemical components or steam, so as not to endanger the air compressor users or cause rapid damage to the unit.

6. Operators should be familiar with the operation manual before they can operate and maintain the air compressor. When there is any change (including operation status), they must immediately notify the equipment after-sales service personnel. At ordinary times, we should pay attention to the regular maintenance of all parts of the air compressor, so that the machinery and equipment are in the best running state.

7. It is forbidden to knock against the pressure pipeline in the air compressor room, and it is forbidden to disassemble it under the condition of charging and pressure.

8. Even in a reasonable use environment, its compressed air will still contain a lot of water and trace oil, which will reduce the production efficiency and product quality of the factory, and it is impossible to directly use untreated air for breathing gas or food contact, so it is necessary to install corresponding compressed air purification treatment equipment.

The above 8 points are the matters needing attention in the placement and maintenance of the air compressor in the air compressor room. In particular, it is important to pay attention to whether the environment of the air compressor room and the ground are flat. Only in this way can the air compressor run in a better state.

Contact us at: //www.esscompressor.com/

WhatsApp: +86 15317057736