What does the screw air compressor panel alarm signal mean?

2024-04-15

There are many alarm signals on the screw air compressor panel. In addition to the temperature mentioned on the panel, there are also some pressure, displacement, etc.

We don’t have the energy to figure out the possible faults corresponding to each alarm, but we can pay attention to the unresolved fault records of the screw air compressor.

Many times, users of air compressor equipment will have an energy-saving mentality due to dealing with too many faults, and they will selectively turn a blind eye to some frequent faults or regard them as a normal state.

During the inspection of the screw air compressor, we should ask the maintenance personnel to find the cause of the failure according to some alarm signals, so as to achieve zero alarm for the equipment.

For example:

Vibration alarm may be caused by excessive internal load or improper installation;

The exhaust temperature excessive alarm may be caused by the oil temperature being too high;

Excessive pressure may be due to improper panel setting load pressure, etc.

If you have any problems that cannot be solved, you can consult us.

WhatsApp: +86 15317057736